NEWS CENTER
Taizhou hydraulic machine tool manufacturer tells you: Nine preparations must be done before using the machine tool!
Memo：In the current industrial construction, especially in the hardware industry, the application of mechanical equipment is very extensive and has become a relatively important aspect, bringing huge impetus to the development of industry.
In the current industrial construction, especially in the hardware industry, the application of mechanical equipment is very extensive and has become a relatively important aspect, bringing huge impetus to the development of industry. In the hardware industry, the use of machine tools is quite important, for example, the use of machine tools.
Machine tools have different classifications based on their working principles and different uses, including CNC machine tools and hydraulic machine tools. Now let's take a look at hydraulic machine tools and learn about their usage precautions or pre use preparations. What preparations should be made before use? Now let's learn more with the hydraulic machine tool manufacturers in Taizhou.
For the use of hydraulic machine tools, the following nine preparations must be made before use. The details are as follows:
1、 Before use, it is necessary to understand the operation of the previous machine tool and the content of the handover record.
2、 It is necessary to properly inspect the workbench, guide rails, and various sliding areas of the hydraulic machine tool, and observe for any impurities and obstacles.
3、 Before use, it is also necessary to check the workbench in a timely manner to observe whether there are scratches or bumps. If any problems are found, relevant personnel should be contacted for repair in a timely manner.
4、 Timely check whether the braking, limiting, and reversing devices are complete and intact.
5、 Timely check the mechanical, hydraulic, and other switches and handles to see if they are in the correct position and not in the working position.
6、 Before use, each tool holder must not be in the working position.
7、 Timely inspect the electrical distribution box, observe whether it is closed properly, and whether the grounding is in normal condition.
8、 Check if the lubrication system of the machine tool meets the standards and observe if the lubrication part is installed correctly.
9、 If the machine tool has not been used for more than one shift and must be restarted for use, a test run of about 4 minutes must be carried out.
For the use of hydraulic machine tools, in order to ensure their safe and stable use, it is necessary to refer to the nine suggestions from the Taizhou hydraulic machine tool manufacturer before using them.
Machine tools have different classifications based on their working principles and different uses, including CNC machine tools and hydraulic machine tools. Now let's take a look at hydraulic machine tools and learn about their usage precautions or pre use preparations. What preparations should be made before use? Now let's learn more with the hydraulic machine tool manufacturers in Taizhou.
For the use of hydraulic machine tools, the following nine preparations must be made before use. The details are as follows:
1、 Before use, it is necessary to understand the operation of the previous machine tool and the content of the handover record.
2、 It is necessary to properly inspect the workbench, guide rails, and various sliding areas of the hydraulic machine tool, and observe for any impurities and obstacles.
3、 Before use, it is also necessary to check the workbench in a timely manner to observe whether there are scratches or bumps. If any problems are found, relevant personnel should be contacted for repair in a timely manner.
4、 Timely check whether the braking, limiting, and reversing devices are complete and intact.
5、 Timely check the mechanical, hydraulic, and other switches and handles to see if they are in the correct position and not in the working position.
6、 Before use, each tool holder must not be in the working position.
7、 Timely inspect the electrical distribution box, observe whether it is closed properly, and whether the grounding is in normal condition.
8、 Check if the lubrication system of the machine tool meets the standards and observe if the lubrication part is installed correctly.
9、 If the machine tool has not been used for more than one shift and must be restarted for use, a test run of about 4 minutes must be carried out.
For the use of hydraulic machine tools, in order to ensure their safe and stable use, it is necessary to refer to the nine suggestions from the Taizhou hydraulic machine tool manufacturer before using them.
